This came from KellyWIP/5-90..
1999 Jeep Cherokee Battery lengths:
|Cable||Color||Length||End 1||End 2|
|B+ to Starter Motor||32"||3/8"||3/8" (w/Cap)|
|B+ to PDC||16"||3/8"||FAQ #9|
|B- to Fenderwell||8"||3/8"||3/8"|
|Engine Block to Firewall||10"||3/8"||1/2"|
|B- to Engine Block||28"||3/8"||3/8"|
|Alternator to PDC||28"||1/4"||FAQ #9|
9) Why do you have question marks in some termination listings?
9a) Because I don't know what PDC you have in your rig. That's why I need you to check - so I can terminate those cables with a lug that fits securely. Since the alternator output can go to either the PDC input post or the battery + terminal, that also introduces a change. Electrically speaking, they're the same connection.
If you're running the alternator output to the battery or the ANL fuse block, you'll need a 3/8" ring on the end of the cable. The PDC gets a 1/4" ring for the 6m/m screwposts, or a 3/8" ring for the 8m/m screwposts. In both of those cases, a washer is recommended to maximise contact (but not strictly necessary. Just a good idea...)
B- to Alternator?